Home > Failed To > Failed To Initialize Inband Hot Plug Controller

Failed To Initialize Inband Hot Plug Controller

Contents

Adding or removing SATA drives to a Linux host yields the following message: kernel: mptsas: ioc2: removing sata device: fw_channel 0, fw_id 4, phy 4, sas_addr 0x500163600010a390 kernel: mptbase: ioc1: LogInfo(0x31120101): Access Configuration: Sun Storage 6Gb SAS HBA—OS hangs Bug 15640353 (6948920)—When both 6Gb SAS ports are connected to a single expander, a X8 wide port results. Its continuosly rebboting. From the output ofpci bus 0x0000 cardnum 0x1c function 0x00: vendor 0x8086 device 0x2660Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1Do I just ignore the WARNINGs or add quotes or Source

If the serial number for the battery starts with an "S,” it's a Smart battery. Its giving the error message "/X[139]: /usr/X11/bin/Xorg: not found". Other forms of addressing the wide port are still in force. If the battery is a non-Smart battery, these two fields are not present.

Dell Powervault Modular Disk Storage Manager User Guide

By setting the cache block size to match the I/O size, the correct number of buf_t's will be available and the ancient I/O will be avoided. Workaround—On the Windows 2008 server, disable “Do not save encrypted pages to disk.” Go to Tools > Internet Options > Advanced > Security and uncheck "Do not save encrypted pages to For more information about ASR activation, see the CAM online help topic “Activating ASR with My Oracle Support.” Refer to the new DTS URLs in the CAM online help topic “Client

  1. The information displayed in the Access Configuration Summary only lists the connected port with the higher alphanumeric sort.
  2. Bug 15498034 (6731595)—J4200/J4400: Sun StorageTek PCI-Express SAS Host Bus Adapter B3: SUSE 9 SP4: Multipath (device mapper): Alternate SIM failure causes host to hang.
  3. Firmware revision 07.80.x.x supports the following cache block sizes: 2500-M2: 4k, 8k, 16k, 32k 6x80: 4k, 8k, 16k, 32k AIX host type for 6140 arrays Bug 15742788 (7092652)—The host type setting
  4. Workaround—Before you replace a failed SIM, be sure to stop all I/O, even in dual path configurations.
  5. Support data for an array is collected and saved in the Common Array Manager by selecting array > General Configuration > Support Data.
  6. Forum Operations by The UNIX and Linux Forums UNIX & Linux Forums > Operating Systems > Solaris Member Name Remember Me?
  7. After the File Managerwindow disappeared, I unplugged the card.
  8. Bug 15558198 (6833156)—1.26.03.00: linux missing targets, fdisk -l and sg_map -i hangs after JBOD second power cycle.
  9. The Solaris OS is now owned by Oracle.

On Controller Summary page, click Specify Network Configuration under the IPV6 section. Volumes not deleting from the Single Page window Bug 15542935 (6807053)—Unable to delete volumes with the “Show Data in Single Page” option from the Volume Summary page. Workaround—Add the license using the GUI. Workaround—Click the Current Jobs page a second time to display the page more quickly.

Workaround—If you are using Veritas with DMP, refer to Veritas support (http://www.symantec.com/support/contact_techsupp_static.jsp) for a recommended host type. Sun Storagetek 6140 Service Manual Password Home Search Forums Register Forum RulesMan PagesUnix Commands Linux Commands FAQ Members Today's Posts Solaris The Solaris Operating System, usually known simply as Solaris, is a Unix-based operating system introduced Normally, it should in-activate when the batteries expire. http://www.unix.com/solaris/44019-solaris-10-installaion-problem-x86.html Workaround—Go to the secondary array and delete the partner replication set from that array.

Plz Help. Remove advertisements Sponsored Links codewarrior View Public Profile Find all posts by codewarrior #2 09-23-2007 n0rus Registered User Join Date: Jul 2005 Last Activity: 23 February 2009, 3:49 StorageTek SAS RAID HBA hot plug is not supported. Enter the command sscs enable -a -e license', where is PerformanceEnhancer or ReplicationSet.

Sun Storagetek 6140 Service Manual

http://www.symantec.com/support/contact_techsupp_static.jsp Error—”no execute access to opt/SMgr/agent/ notifysmagent.sh”—occurs during system boot-up Bug 15629617 (6934913)—This error occurs when /opt(SMagent install directory) is built on a disk partition other than root partition. https://docs.oracle.com/cd/E24008_01/html/E38188/z40001911233955.html Enabling Try and Buy license using the CLI Bug 15874509—To enable Try and Buy or evaluation licenses using the CLI, log into the system using the sscs command and issue sscs Dell Powervault Modular Disk Storage Manager User Guide Workaround—Use paginated view to delete volumes. Array loses communication during registration when IPV6 is enabled Bug 15744716 (7096012)—The IPV6 Routable address is not being set correctly during array registration.

Workaround—The default sends an alert type of ‘clear'. http://arnoldtechweb.com/failed-to/failed-to-initialize-the-nvidia-gpu-at-pci.html This issue is fixed in F5100 expander firmware 5.4.4. When this timer rolls over from 0xffffffff to 0x00000000 (after approximately 828.5 days), if there is host I/O to volumes, the associated drives fail with a write failure. Feb 8 09:01:58 blue2 This may result in reduced system performance.

disks) due to changes in Access Configuration, cable re-configuration, firmware upgrades, or the addition of new storage can potentially cause the host to hang or panic due to known Linux kernel But if You have problems with the installed hardware please searching for the HCL List of sun, for support of hardware components Sun Microsystems - BigAdmin - Solaris OS: Hardware Compatibility Solaris Issues Solaris with Veritas DMP or other host type Bug 15840516—With the release of firmware 07.84.44.10, the host type ‘Solaris (with Veritas DMP or other)' is no longer a valid have a peek here From the FRU Summary page, click Battery.

I get the Grub menu displaying Solaris along with Win Xp....After i select Solaris the following happens, "Failed to initialize inband hotplug controller" The above message repeats three times & i Now i nstalled fully with 32bit. Feb 8 09:02:33 blue2 npe: [ID 236367 kern.info] PCI Express-device: pci1014,[email protected],2, audio8100 Feb 8 09:02:33 blue2 genunix: [ID 936769 kern.info] audio8100 is /[email protected],0/pci1014,[email protected],2 Git os.solaris.opensolaris.xen Prev Next Thread Index Subject: Re:

Install is on anIBM T43p notebook.

Sun StorageTek SAS RAID HBA hot plug is not supported. Workaround—Though event notification is lost as a result, there are no adverse effects because the SMagent detects the disk device(UTM volume) during re-scan. Andrew, could you post the whole panic stack so we can make certain you're not encountering something else? The CAM operation is not affected and these messages may be ignored.

Smokin Whale Solaris 13 10-26-2011 06:30 AM Solaris 10 Not Logging Anything gadonj18 Solaris 11 07-21-2011 09:37 AM How to enable logging in Solaris 10? Battery nears expiration: 06.xx write back cache should not be disabled Bug 15668206 (6983826)—With the 06.xx array firmware, the write back cache is incorrectly inactivated when the batteries enter the near-expiration Bug 15549335 (6817878)—OS does not see zoning filtering through to proxy server correctly. Check This Out Installation fails on SUSE 10.3 32-bit and 64-bit hosts Bug 15755131 (7112028)—Installation of CAM fails with the error: The package jdk- did not install successfully.

First upgrade only the controller firmware, and then upgrade the drive firmware. Please anyone help me on this installation. Workaround—Reboot host. The OS hangs with dual ports in single-zoned domain.

Currently, this generates warnings whenever an administrator installs other unrelated products such as RPMS, HBA management applications, or failover RDAC packages. Array name remains unchanged after a full array reset Bug 15774381 (7147538)—After performing a full array reset from the Administration page, the CAM array name is not changed to “unlabeled” as Configuration Issues Reregister Auto Service Request for CAM CAM 6.9 uses a new transport protocol for phone home communications with Oracle. For example, if Ports 0 and 2 are connected into the same expander, only Port 2 is listed.

Feb 8 09:01:55 blue2 mac: [ID 543131 kern.info] NOTICE: bge0/0 registered Feb 8 09:01:57 blue2 rootnex: [ID 349649 kern.info] xsvc0 at root Feb 8 09:01:57 blue2 genunix: [ID 936769 kern.info] xsvc0 Access Configuration pages are missing port 0. Communication Loss reported from Windows and Linux when registering JBODs on Oracle Enterprise Linux 6 proxy Bug 15715109 (7044185)—Windows and Solaris management hosts report communication loss. I get the Grub menu displaying Solaris along with Win Xp....After i select Solaris the following happens, "Failed to initialize inband hotplug controller" The above message repeats three times & i

Workaround—Retry the upgrade (multiple attempts might be needed) or use a non-Adaptec HBA. It is Solaris 10 If someone ask you abbout the Version Please send them the output of more /etc/release Solaris 10 8/07 s10s_u4wos_12b SPARC Copyright 2007 Sun Microsystems, Inc. Workaround—When the Network Expansion Module (NEM) and Sun Blade 6000 Disk Module are flagged for upgrade, execute an upgrade on the NEM first. When a SAS address changes, Sun Storage Common Array Manager will still report the initiator and the devices are associated; however, the F5100 expander has actually disassociated the host from the

Password Home Search Forums Register Forum RulesMan PagesUnix Commands Linux Commands FAQ Members Today's Posts Solaris The Solaris Operating System, usually known simply as Solaris, is a Unix-based operating system introduced flash firmware image failed FWR_UPGRADE_FAILURE,6 The firmware on the JBOD remained at 3R21 and all disks remained at the same FW level. Change the text to: -m,--alarm-level Specifies the minimum priority level of alerts to be sent out. On the Battery Health Details page, you will see Last Learn Cycle and Next Learn Cycle fields.

Correction—For disks supporting Data Encryption Services, a value of True means this disk is locked and cannot accept read or write operations. To obtain the IPV6 IP address, Routable IP address, and Router IP address for the array, use the netCfgShow command via the array serial port.